Buy Low Price From Here Now
The Milwaukee M18 Hammerdrill/Driver delivers revolutionary power, run time and ergonomics. The 4-Pole Frameless Motor generates a best-in-class 650 in-lbs. of torque to meet the application rigors of the jobsite. Utilizing an 18V XC Li-Ion battery, the 2611-24 delivers up to 65% more holes per charge. At only 9 1/4in. long and 5.3 lbs, it is the most compact high performance hammer drill available, which minimizes user fatigue and maximizes productivity by fitting into tight spaces. Cordless: Yes, Volts: 18, Rated RPM: 0 - 450 / 0 - 1,800, Torque (in./lbs.): 650, Blows Per Minute (BPM): 0 - 28,000, Battery Included: Yes, Charger Included: Yes, Case Included: Yes
Readmore
Technical Details
- Milwaukee cordless, high performance 18-volt hammer drill kit- Features 4-Pole frameless motor to maximize tool efficiency to increase run-time; 1/2-Inch single-sleeve ratcheting metal chuck with carbide jaws and variable speed trigger
- The on-board battery fuel gauge displays remaining run-time and built-in LED light illuminates work surface
- The kit includes 2 XC 2.8-Ah Li-Ion batteries, a 1-hour charger, and an impact resistant case
- 9-1/4-Inch at 5.3-pounds; backed by 5-year limited power tool warranty
See more technical details
By Phillip Marsh (Texas)
Overall the M18 is a great drill with an excellent clutch (that does not slip even with small twist drills the way the Hitachi does), good clutch mechanism, 2 speed gear box that is smooth to change, a bright dual LED light setup, and a sturdy case. It does not come with a bit holder or belt clip but you can special order the 4 parts needed and pay an extra $20 for what would have cost Milwaukee 50 cents to add to the kit - don't you love it when the bean counters are in charge.
The Milwaukee has a new design for the side handle that attaches the way the one for the Ridgid drill does at a 90 degree angle to the handle on either side. I prefer the old style which like those on the Makita and DeWalt drills can be anywhere in a 360 degree circle. With some tough drilling situations I like to have the "side" handle straight up just like a heavy duty core drill so I get more effective control over the drill twisting when the bit catches. With the Milwaukee I can't do this and so half the benefit is gone - can still use the handle but is it less effective than with the old design. The engineers probably wanted to make the drill shorter by an inch but this is not a good trade off in my opinion. Where I need short I will use a right angle drill which with its longer main handle works better in controlling any twisting of the drill anyway.
A couple of important caveats to consider before investing in this drill. It uses lithium-ion batteries which are known to overheat and catch fire so the engineers at Milwaukee decided to be very conservative and whenever the power draw exceeds a set level, power is cut to the motor and the LED lights go off. It is an instantaneous cutting off of the power so when using a large hole cutter there is a frequent start and stop and restart and restop while boring a hole which is not at all good. We use lithium-ion powered 18 volt drills from Hitachi, Makita, and DeWalt as well as the Milwaukee M18's and it is only with the Milwaukee drills that we have this problem at anywhere near this level. The only way to get around this is to start off at partial power and slowly add power, being careful not to run the drill at a full torque load.
The manufacturer's specs don't take this overload protection into account and you really cannot use the full power from the drill in situation where there is a high torque load at any point of the process. If Milwaukee had the circuitry designed to operate more like a slow blow fuse one might be able to get access to the full power potential of the drill.
The recharger is also designed to do a very slow charge so it takes 40 minutes on average to recharge the battery compared to 30 minutes with the Makita LXT and 15 minutes with the DeWalt DCD970 batteries. In theory this is supposed to result in longer battery life but on the job it means having a third battery charged and ready which is not something we need with the other drills. A nice touch with the Milwaukee charger is its plug which permits another plug to share the same outlet.
For really heavy duty use the DeWalt DCD970 is a much better drill for two key reasons. First is the more sane overload protection that has yet to cut power to the drill even when we have used it with a Blue Boar TCT Stucco & Wood bit to bore 6-1/4 inch holes through stucco walls and OSB sheathing.
BLUE BOAR 6-1/4" (159mm) Stucco-Brick & Wood Tungsten Carbide Tipped TCT Hole Saw with M16 Thread, requires mounting shank with M16 Thread and 10mm carbide pilot bit
The second reason we much prefer the DeWalt DCD970 is that it has a 3-speed gearbox. With a corded drill if the hole cutter is not very efficient (like a bi-metal hole saw or a self feed bit going into wood) it takes longer, sometimes a lot longer, to cut the hole but that is all that happens. With a cordless drill heat is more of a problem and when the power draw is too fast for the battery it loses a lot more of its available power and needs to be recharged after cutting fewer holes or driving fewer screws. The DeWalt DCD970 gives you 3 choices and it is more effective as it works within the "sweet spot" of its power range.
I can cut a hole faster at a slower speed with the DeWalt as it just keeps on turning than when using the M18 where the drill's power keeps going off and on repeatedly. The DeWalt is a smoother operating drill and I can cut 6" holes with a modern hole cutter like the Blue Boar TCT hole cutters and a 18 volt cordless drill, while my Milwaukee corded Hawg stud drill is maxed out with a 4 5/8 inch Milwaukee Selfeed bit. Matching the best hole cutter and the best torque range makes a big difference in how long and how many holes we can cut per battery.
We actually decided on a recent job to time how long it took to make 3 5/8 size holes in 1 1/8 inch thick Advantech subflooring and with a new Lenox bi-metal hole saw it took 45 seconds and it was smoking by the time the first hole had been made. With a Blue Boar TCT hole cutter it took 3 seconds with the DeWalt DCD970 and 5 seconds with the M18, and 4 seconds with a Makita BDF452HW drill which our light duty drill. After cutting the single hole with the Lenox hole saw it took more than half an hour to recharge the M18 battery. Now we know that getting a drill with a wide range of torque gearing and using a modern hole cutter makes all the difference in the world.
BLUE BOAR 3-5/8" (92mm) Self-Feed TCT 2-1/4" deep multipurpose Tungsten Carbide hole cutter outperforms self-feed bits & bi-metal hole saws. Cut wood, MDF, OSB, laminates, Hardie & chipboard, plaster, drywall, brick, Formica, non ferrous materials
By 24 voltsdc (Colts country)
I have owned this drill now for several months. I wanted to wait awhile before reviewing it so I could use it in many different applications, and compare it to other drills I have owned.
First thing you notice when using this drill is it's power. I owned the V28 drill prior to this one and I must say the M18 has it beat hands down! I use uni-bits or step bits often and this drill chews through metal like no other drill I have owned. Another thing I noticed was how smooth it operates and the excellent build quality. This drill should hold up to worksite abuse very well.
The drill fits nicely in the hand and is not too heavy. I would say it's heavy enough to know you are using a quality tool and light enough to use all day without straining your wrist or arm.
Battery life is very good. I like the battery gauges that let you know how much battery life is left. This is something Milwaukee invented which was a great idea.
My only complaint is the small case the drill comes with. Could use more storage for bits.
I would recommend this drill to any tradesman or homeowner alike who wants a good quality drill that should last for years.
By Federico Lawrence
This is an excellent product that displays a great amount of toque to get the job done.
By Romeo A. Ostorga (LAS VEGAS ,NV)
That was a great experience buying from you,I recomend this company,It's been a pleasure to deal with you guys.
By Seth Mccanse (Oregon, IL)
First, I'll state that the drill itself, along with the M18 batteries, are great. If it wasn't for Milwaukee's poor service, this would be a 5 star rating.
I am a partner in a small home building company. We had previously purchased the compact M18 drill/driver (2601-22) and liked it, so decided to invest in their more powerful "flagship" hammer drill/driver as well.
The compact drill/driver came with extremely useful belt hook and bit holder accessories, so I expected them to be on their self-proclaimed "flagship" drill as well. When I discovered these parts missing I contacted Milwaukee, thinking it had been left out by accident, and they said they stopped providing them as standard accessories late last year. So, with shipping and minimum order fees, I had to spend over $20 to get $3 in parts. Very frustrating considering the high cost of this drill.
Second, the trigger switch on my drill died after 3 weeks of light use. I sent it in for warranty repair, and the current estimate is that it is going to take 3-4 weeks to get my drill back because Milwaukee for some reason is not making enough repair parts for this drill. And they would not just send me a new one. Again, extremely frustrating considering the high cost of this drill.
Images Product
Buy Milwaukee 2611-24 18-Volt Hammer Drill Kit Now
0 comments:
Post a Comment