Milwaukee 48-32-2100 OFF-SET Power Screwdriver Head

Buy Cheap Milwaukee 48-32-2100 OFF-SET Power Screwdriver Head

Buy Low Price From Here Now
Bits (qty.): 1, Bit Material: Durable Die Cast Construction
Readmore

Technical Details

- Extends power of cordless screwdrivers - 100 in/lbs. torque, 400 RPM
- Durable die cast construction
- Magnetic output socket
- Holds all slotted, Phillips, and other 1/4 inch ANSI hex bits
- 360 degree adjustable thumb flange
See more technical details

 "very handy tool" 2009-11-11
By Kerry Pierce (Detroit, MI USA)
I like this tool a great deal, but it only gets used when I can't use its bigger brother, the Milwaukee 49-22-8510 Right Angle Drill Attachment Kit



The offset head is significantly cheaper than the Milwaukee right angle head and it really shows. The right angle head is a finely designed and machined tool, whereas this tool doesn't have that refinement. The right angle flange is especially problematic because it is not attached to the offset head by any means other than friction. So, you have to fool around with it a lot, having it fall off when you pick up the tool or simply fall down onto the drill or screwdriver chuck. It always seems to fall off at the most inconvenient times and then magically find its way under the biggest pile of the heaviest material in the area. I suppose that if you used the tool enough, you'd get used to handling it just right, to minimize that issue, but for me, it's enough to cause me to always reach for the Milwaukee right angle tool first. I'm glad that I have the off-set head, because it is certainly useful at times, but I do wish that Milwaukee would upgrade the unit so that the thumb flange wasn't a hassle. If/when they do that, I'll buy another.

 "Sturdy and practical" 2009-10-15
By I. Forbes
Very useful with lots of torque. Very glad my spa repairman introduced this product to me.

 "Worth the price" 2009-05-30
By Nomad (Minneapolis, MN)
Item arrived earlier than expected and in new condition. Seems to be well made. Perfect for removing/installing dash and rear deck car speakers.

 "Fantastic" 2008-06-21
By J. Shane Franz (Salt Lake City, UT)
This is a dandy little adapter that helps you screw in tight places. Really helpful, and nothing else like it on the market. Remember folks, that this is only for a small electric screwdriver - doing heavy duty work will probably cause it to fail. Fine for small wood screws though!

 "Save the packaging!" 2007-09-08
By Daniel Sternberg (S. Florida)
This must be a really tough tool to engineer for indestructability. Lots of re-directed torque-you can imagine the stress on the gears. I usually trust Milwaukee for tools that can take a licking and keep on ticking, but this definitely isn't one of them. The tool doesn't last for more than a couple of stressful applications before the gears strip. Nobody else makes anything that can get in and out of tighter spots though, and it has become a necessary part of my tool box. I have found that Home Depot will take these back for exchange when give out, if you save the packaging and tell them the tool is defective (which is no lie). Without the packaging they have to go back to the manufacturer, which is a p.i.t.a. and takes time.




Images Product

Buy Milwaukee 48-32-2100 OFF-SET Power Screwdriver Head Now

Milwaukee 48-11-0100 2.4-Volt 1-1/3-Amp Hour NiCad Stick Style Battery

Buy Cheap Milwaukee 48-11-0100 2.4-Volt 1-1/3-Amp Hour NiCad Stick Style Battery

Buy Low Price From Here Now
Compatible With: Milwaukee Cordless Screwdriver, Battery Type: Ni-Cd, Volts: 2.4
Readmore

Technical Details

- 1-1/3-amp hour stick-style battery
- No memory effect-full battery capacity is always available
- Ni-Cad battery
- For use with Milwaukee 2-2/5-Volt cordless tools
- Features 10-hour fast charge
See more technical details

 "Good value -- poor longevity" 2009-01-06
By Ken Mckenzie (Lafayette, CA United States)
This is the 3rd battery I've purchased from Amazon. They do the job well enough but they don't last as long as I would like. Like all NiCads they self discharge over several weeks but I expected that they would not die in under 5 years. Instead, they all seem to go after 3 years. I'd be really unhappy if I was paying $30 each (full price). I'd love to be able to upgrade to NiMh or Lithium but I can't find them here.

 "Typical Nicad" 2008-11-03
By Duffer. (Conyers, GA United States)
This is a typical nicad battery that is as lame as most nicads. I bougt it because I could not find a quality battery for my Milwaukee screwdriver and this was the only one available. Darn shame but next time I buy a screwdriver it won't have a nicad battery.

 "Rechargable NiCad Battery" 2008-08-01
By D. Lavry
We use these in our manufacturing operations and they last for several days. We have backup batteries on charge so we are never without power. They hold a good charge under heavy use for at least two years.

 "Good Battery at a great price" 2007-11-03
By Cheryl R. Crouse (Lewiston, ID)
What's to say? I received a good battery for a great price and I got it in a timely fashion.

 "battery review" 2007-08-31
By Michael Bercun
batteries are a standard product, came in a standard package and were shipped in a timely manner


Images Product

Buy Milwaukee 48-11-0100 2.4-Volt 1-1/3-Amp Hour NiCad Stick Style Battery Now

Milwaukee 48-89-4431 Shockwave Hex Drill Bit Set, 7-Piece

Buy Cheap Milwaukee 48-89-4431 Shockwave Hex Drill Bit Set, 7-Piece

Buy Low Price From Here Now

Features and Benefits:

• Thunderbolt® tapered web and parabolic flute for durability and chip removal
• 135 degree split point to start on contact and eliminates walking
• Taper-fit construction makes the bit stronger and eliminates wobble

Milwaukee® Shockwave Impact Duty™ Hex Drive Drill Bits are engineered for extreme durability.The Shockwave Impact Duty™ Hex Drive Drill Bits feature the Milwaukee Thunderbolt® web for durability and chip removal paired with taper-fit construction for a stronger bit with less wobble. The bits include a 135° split point to allow the bit to start on contact and eliminates walking. Broadly targeting cordless users, the Shockwave™ Impact Duty accessory line is not only ideal for heavy duty impact applications, but delivers a full system solution for all the user's drilling and fastening needs.This set includes the following sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", and 1/4".

Readmore

Technical Details

- Milwaukee 48-89-4431 Shockwave 7-Piece hex drill bit set
See more technical details

 "Nothing special" 2010-03-12
By D. Deater (Winston-Salem, NC)
I got these in Dec. 2009 as a gift. I was excited to try them out, but was surprised that they really did not perform better than ordinary bits, at least in wood. Then the other day, I was drilling in MDF and the second smallest bit broke off in the MDF. Can you imagine...in MDF. That might have been the first use for that size bit. I was expecting much better quality for the price and Brand. I have several Milwaukee tools, specifically nail guns, and they are of very high quality.

 "Good Bits So Far" 2010-01-28
By D. Larson (Chandler, AZ)
Used these bits on a recent project and they seem to be stronger than other types. They worked well.


Images Product

Buy Milwaukee 48-89-4431 Shockwave Hex Drill Bit Set, 7-Piece Now

Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit

Buy Cheap Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit

Buy Low Price From Here Now

Features and Benefits:

• 3/8'' Single sleeve ratcheting chuck
• 3 3/4'' Head length
• Electronic Clutch - 11 Settings plus drill mode for complete control
• Built In LED's - Illuminates work surface and indicates clutch out
• Extended Paddle Switch - Provides convenience and comfort

With a head size of only 3.75", the M12™ Cordless 3/8" Right Angle Drill Driver delivers 100 in-lbs of torque in a compact light weight design. The first sub-compact right angle drill driver with a spindle lock chuck, the 2415-21 is the most versatile right angle drill/driver in the industry. Built in electronics include an electronic clutch, fuel gauge, speed control and overload protection. Kit includes the following: Drill, 1 battery and charger.

Readmore

Technical Details

- Features 3/8¿¿ Single Sleeve Ratcheting Chuck for Maximum Versatility and Grip. The 3 ¾¿¿ Head Length is Great For Working In Tight Spaces
- An Extended Paddle Switch Allows for Controlled Use In Multiple Positions
- Electronic Clutch 11 Settings Plus Drill Mode For Complete Control Built-In LED¿s Illuminate the Work Surface and Indicates Clutch Out
- The On-Board Fuel Gauge Displays Remaining Run-Time on the M12 LITHIUM-ION Battery Pack
- Kit includes: 2415-20 Right Angle Drill/Driver, (1) M12¿ LITHIUM-ION Battery Pack, 30-Minute Charger, Carrying Case
See more technical details

 "having the right tool for the job is so much easier" 2010-03-17
By Jaguar
The specs for the drill can be found a number of places. My own personal experiences are as follows:



I am just beginning to get into cabinet making as a hobby. My current project involves about 1 doz drawers mounted on glides in very tight openings. I knew that my big drill/driver and my smaller drivers would not fit so I considered the following right angle drills:



Dewalt 18v

Bosch 12v

Milwaukee 12v



I decided to buy the Milwaukee based on a number of things:



Size (it is fairly consistent in its size with no large areas to work around)

Balance (the battery balances out the head nicely providing greater control)

Power (power enough to remove 3" screws in hardwood)

Worklight (no need for a third hand installing shelf rails)



The Milwaukee balances quite nicely in the hand and does not have areas that are larger than the actual working portion of the device - unlike the Dewalt and it is rather slim overall - unlike the Bosch. This is especially noticable when working in tight areas. As a result it becomes more like a natural extension of your hand than that of a foriegn object.



I also like the variable speed trigger control and the built-in work light is perfect for placing screws in those dark corners of cabinets.



Some may complain that it only comes with one battery or the case is a soft zippered case instead of a hard case. Valid points- however consider that this Milwaukee is not meant to replace your primary drill that takes a beating and keeps on ticking, but rather to augment it like a fine precision tool for the times when beauty is needed over brawn. The battey issue was not a problem as I never used up the battery when installing the rails. Besides a complety dead battery charges in about 30 minutes and it is a L-ION type so between use refreshes are quite easiliy done with no detimental effect on the battery. A second battery can be stored in the case and the case itself is quite suitable for it purpose and how the tool will be used.



As to power - I recently had to remove some 3" screws that were set in Oak with a corded right angle drill. The Milwaukee had no problem removing them. The clutch worked great and the work light made the process a lot safer.



I am more than pleased with the tool and I am sure that I will create new projects that will allow me to take full advantage of this tools special capabilities.

 "Milwwaukee 2415-21 M12 12 volt 3/8 RA Drill/Driver Kit" 2010-01-22
By P. Johnson (USA)
Nice 'lil drill. No chuck wobble, seems to hold bit tightly. Good addition to the M 12 line of power tools. No buyers regret on this tool.

 "about the best cordless solution so far..." 2009-12-02
By F. Carrino
Ok this is a very good tool. Milwaukee is very late to the small lithium market but they do appear to have done their homework. I really like the M12 line of Milwaukee tools.



I will focus my review by comparing the M12 to it's main competitor the Bosch PS10-2A both are meant to be lighter duty cordless right angle drill/drivers for tight jobs like installing under cabinet lighting or drawer handles. They are not meant for removing 3/8 lag bolts or other heavy construction needs.



The head length on the M12 is about the same as the Bosch, ok actually it is 1/4 inch longer but it has a ratcheting chuck so it can take drill bits of all kinds without the need for an adapter. the Bosh has a hex speed chuck so you have to use hex drill bits or an adapter which effectively increases the head length well beyond the M12. Both have extended paddle grips, and the grips are both on the chunky side. My in the hand opinion is the M12 feels just a bit thinner and easier to grab. Speed control is much better on the M12 the trigger is very linear and easy to control. The Bosch is very poor in this regard, more of an on/off experience. The Bosch is slightly shorter in overall tool length. I did not measure it but about an inch when configured for rt angle use. Both tools use an electronic clutch and both are awful!!! the lowest setting will still spin out of a philips head when in a tight corner. Mechanical clutch would add weight and some bulk so it is a compromise. the M12 has more torque (100 vs 80) and a higher no load rpm (800 vs 600)



Now for the real kickers. The M12 has a spindle lock! Now why do you care? It allows you to use the tool as a "wrench" to finish tightening a screw or bolt by hand! the is very handy and allows for some muscle or finesse that you can not get with the Bosch. The M12 comes in a very nice case with a charger and feels very solid in the hand. Excellent tool.



So why why only 4 stars.. well two things the electronic clutch and the main reason... only comes with one battery! It is already a bit pricier then the Bosch (about $10 as of this writing) but the Bosch comes with 2 batteries. A spare M12 battery is about $40 so this is no small matter. I love this tool, I can forgive the clutch, but the lack of a second battery in what is suppose to be a pro tool is beyond cheap.



Specifications

Voltage 12V

No Load Speed - 800 RPM Bosch

Torque 100 in-lbs

Chuck Type 3/8 in Ratcheting

Head Length 3-3/4 in

Electronic Clutch Yes

Clutch Settings 11 + Drill

On Board Fuel Guage Yes

LED Light Yes

Battery LITHIUM-ION

No of Batteries Included 1

Charge Time 30 minutes

Length 11.75 in

Tool Weight 2.43 lbs


Images Product

Buy Milwaukee 2415-21 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit Now

Milwaukee 48-08-0401 Quik-Lok Job Saw

Buy Cheap Milwaukee 48-08-0401 Quik-Lok Job Saw

Buy Low Price From Here Now
6-3/4" long without blade; weighs .5 lbs. and comes with one blade Features an ergonomically shaped soft grip handle and threaded end for extension pole use Handy, versatile Quik-Lok™ blade clamp accepts any 1/2" tang reciprocating saw blade and needs no tools to change blades Heavy-duty Quik-Lok™ Job Saw is ideal for campsite or hunting use, drywall cutouts, pruning and general sawing Use to cut apart boxes, foam, insulation, cutting shingles, linoleum, carpet or vinyl
Readmore

Technical Details

- Quik-Lok Blade Clamp - no tools needed to change blades
- Comfortable Tactile, Soft Grip Handle ergonomically designed for prolonged cutting in any direction
- Versatile - Accepts any 1/2" universal tang reciprocating saw blade
- Threaded end for attaching to standard extension pole
See more technical details

 "Job saw gets the job done." 2010-01-30
By Thomas B. Lewin (Downers Grove, IL)
I purchased this saw along with a 12-pack set of Milwaukee blades. I have no problem cutting through drywall, screws, pvc, wood, anything that needs cutting. The threaded end is also nice, you can screw in a standard broom handle and get a servicable pole saw to add some reach. Plus whenever I spring for the reciprocating saw I'll be able to use the same blades which is nice. I think its a perfect product for what it does.

 "Solid, Versatile, Outstanding Value!" 2009-12-11
By Max Power (Arlington, MA)
I've been using the Milwaukee 48-08-0401 Quik-Lok Job Saw for several months now around my new house for a variety of purposes. Chief amongst those has been cutting holes in old lath and horse hair plaster walls. With the narrow point of the included blade, I can saw holes with only a couple of small pre-drilled pilot holes and minimize the damaging to the surrounding plaster.



What makes the saw excel, however, is the versatility. Changing the blade is simple, quick, and never compromises the sturdy feel. I purchased this saw with the blade kit (Milwaukee 49-22-1129 12-Piece Ultimate Demolition Sawzall Blade Set) and I have used it to make easy and controlled cuts through, wood, metal, plaster, dry wall, rigid foam, etc. I have also since purchased the Milwaukee Sawzall which can utilize the same variety of blades, increasing the value.



The other day after a snow storm, I had to perform some emergency pruning on a tree with branches leaning against my neighbors house and blocking the drive way. I remembered the threads on the end of this job saw and attached it to an old paint roller handle. Changed the blade to a long wood cutting blade, and was able to easily prune the small/medium sized branches in the tree. Perfect example of this tool's ease of use and versatility. Never thought I'd need it for that purpose, but there you go....5 stars.

 "Milwaukee job saw is the deal" 2009-11-19
By Laurel Thomas
It is a great handy tool that I am very pleased with. I have bought many other cheaper job saws that didn't hold up or last through the job I was doing. The blades are a little on the high side to replace but it evens out money wise in the end because the blades last so much longer and much more durable then the cheaper ones so I don't have to keep buying more blades job after job. I also like that I can use the different blades from my Milwaukee sawzal on the jab saw and vice versa. I highly recommend this product and company.

 "Milwaukee Tools the best there is at this price." 2009-09-07
By S. Howes (USA)
I own a large selection of Milwaukee tools and a few Hilti tools. IMO, getting Milwaukee products are like getting Hilti products for a little less money. However, if you work in punishing, demanding conditions everyday, all day, then Hilti may be the way to go for the very long haul. For 90%, Milwaukee is a good bet

 "hefty" 2009-09-02
By wrenchrrr
First thing I noticed is how heavy it is, before I opened it. If you can manage to get through the adult proof packaging without opening an artery, put it in your hand. It feels perfectly balanced, so the weight is a non-issue. The blade locks in place easily. I can't wait to try it...


Images Product

Buy Milwaukee 48-08-0401 Quik-Lok Job Saw Now

Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery

Buy Cheap Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery

Buy Low Price From Here Now
For use with all 14.4 Volt power plus tools and work lights. U.S.A.
Readmore

Technical Details

- 2.4 amp hour capacity for longer run time
- No memory effect - Full battery capacity is always available
- Ni-Cad battery
- For use with Milwaukee 14.4 volt cordless tools
See more technical details

 "Rechargeable battery" 2010-02-06
By L. Marchione (NYC USA)
It's been working very well.

If it wasn't for the very expensive price I would have given it a 5 starts.

 "Milwaukee 14.4 volt battery" 2009-10-14
By J. Shufelt (Central PA, USA)
This new battery works fine - now we just need to see how long it will last!

 "Great battery" 2009-09-22
By R. Curtis
This battery is more than I expected. It has a higher ammount of amp hours(2.4) than the original and lasts much longer.I am pleasantly surprised.

 "NiCad MUCH stronger than original" 2009-04-11
By Stellarg (Erie, PA)
Nearly bought a new lithium ion drill-driver/flashlight kit but saved about $180 to rejuvinate what I thought was a hopeless situation. 10 year old Milwaukee 3/8" drill-driver works as well as when new...even better with the 2.4 Amp battery. Originals died because I let run on flashlight until dead thinking I was 'exersising' it for longevity...but learning too late that method will ruin the battery. I have used occasionaly for 11 years, and hated to part with excellently performing drill and good flashlight. I purchase this battery as a last resort; charges on the original charger and seems to last 4x longer than the original battery (1.8 Ah). Pricey but worth it!

 "Doesn't hold a charge" 2009-03-01
By John Dow (Indian Head, MD USA)
I tried to take care of the batteries for two years, by not leaving them in the charger for more than it took to charge them up, just charging them up when I used them, not over-discharging them. But they both stopped holding a charge after less than two years. When they're new the drill works great.


Images Product

Buy Milwaukee 48-11-1024 14.4-Volt 2.4 Amp Hour NiCad Slide Style Battery Now

Milwaukee 0234-6 Magnum 5.5 Amp 1/2-Inch Drill

Buy Cheap Milwaukee 0234-6 Magnum 5.5 Amp 1/2-Inch Drill

Buy Low Price From Here Now
This heavy duty Magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 amp motor, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool with a variety of accessories to drill into wood, metal, plastics and composites. U.S.A. Amps: 5.5, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: No, Variable Speed: Yes, Case Included: No
Readmore

Technical Details

- Powerful 0-850 rpm drill with trigger speed control reversing and removable brush cartridge
- Features new, long and super flexible Quick-Lok cord
- Has plastic body, aluminum/magnesium alloy gear case, soft glass-reinforced nylon handle
- Designed with detachable cord and side handle
- Kit includes 234-1 Magnum Drill, Quik-Lok Cord, Rubber Flex Key Holder, Side Handle, Chuck and Chuck Key
See more technical details

 "Made in China" 2010-03-20
By M. Swaim (NC United States)
When my imported drill died, I remembered the excellent Milwaukee hole shooter I used to use at a job long ago. I remembered the excellent service I've got out of a USA made Milwaukee circular saw and USA made Milwaukee Sawzall. My local big box store didn't carry the Milwaukee drill I thought I wanted, so I ordered it from Amazon thinking that I was going to get another fine product from Milwaukee. Well, right beside the line that says Milwaukee Brookfield IL is a line that says Made in China. I'm not at all happy that this renowned professional tool supplier has chosen to outsource product. It would be one thing if they were offering a lower cost line that was outsourced, but this 1/2" drill cost significantly more than the similar competition, and I bought it specifically believing that it was a quality USA made product. It's an import with a plastic housing not terribly dissimilar from other more obvious imported drills offering more features at lower prices available locally.



That said, it does seem to be well made and has already proved capable of easily running a 2 1/2" hole saw, a 3/4" ship's auger bit, and a 1 1/4" wood boring bit all through 2"x4"s and 2"x6"s, as well as plywood. It's also run a 1/2" metal bit through 1/4" mild steel without a hitch (though that did take awhile). Overall, I like the drill, but I wish that a company named after an American city, who built their reputation on American union labor wouldn't outsource to countries where their external costs are completely hidden or would at least be honest enough to put that in bold print on the external advertising. For me, this is the last Milwaukee anything, since even though I like the products, I don't trust the company any more. That's indicative of just how far we've fallen as a country, if even the brands named for our cities aren't made here anymore. Good buy Milwaukee. You were once a fine brand.

 "After some twenty years..." 2010-03-03
By Joe Sevy (Idaho USA)
This is the same drill I bought some twenty years ago. From the day I bought it, to today; it has NEVER been a problem. It's never been repaired, it's never started making "that funny noise". Other than a little rust on the chuck, it's still the same drill I payed for. It's simply not possible to ask for a better value.

 "best that money can buy" 2010-02-04
By J. Hough (Austin, TX)
this has everything you need in a corded drill; it is a beautifully engineered tool. I can't get over how it sounds (like a jet warming up)!

 "BEST DRILL FOR THE MONEY" 2010-01-07
By WOODCARVER (CLEVELAND, OH)
Great drill with plenty of power. This is the drill to have when you want good variable speed control. Well built. We've had a similar model in our machine shop at work for well over 10 years. It gets beat on (lots of holes in steel plates, covered in oily chips,...) and i think about all's we've done is fix the trigger switch.

 "Best drill evar!" 2009-12-28
By J. Bussjaeger (USA)
A heavy duty long lasting wonder drill! Oh, it is heavy too.

My old friend has had this model drill for 20 years. google it, you'll find pros who have 20+ year old versions of this drill.



The only downside is that it is now made in China instead of Mexico and before that it was made in the USA; you'll see the cost is lower now than it was long ago as a result. I don't know if quality has suffered, it seems fine to me.


Images Product

Buy Milwaukee 0234-6 Magnum 5.5 Amp 1/2-Inch Drill Now